REQUEST A QUOTE →
EN
CNC · Weihong

NcStudio

Easy to operate and quick to learn, with motion control designed specifically for waterjet cutting.

NcStudio control interface
DXF
Imports directly
RTCP
Automatic correction when the head tilts
10+
Interface languages
01

Drawing and Programming

Built-in basic drawing tools let you draw and program simple parts directly on the machine. For complex shapes, we recommend drawing them in professional CAD software and importing the DXF files directly.

NcEditor interface
Fig. 01 — NcEditor interface
02

Cutting Operations

Set lead-in and lead-out lines, tool compensation, bridging, micro-joints, chamfers, and arrays directly in the software. Set the cutting sequence automatically or adjust it manually by drawing a line.

  • Bridging joins nearby shapes so they are cut in one pass, with fewer valve cycles and less wear on the high-pressure valve and oil pump.
  • Micro-joints leave a short uncut section, so finished parts don't drop into the tank.
  • Corner control slows the machine down automatically at corners for cleaner corners.
Lead line settings
Fig. 02 — Lead line settings
Auto sort
Fig. 03 — Auto sort
03

5-Axis Tilt

Use the same tilt angle for the entire part, or set different tilt angles and corresponding speeds for individual edges and save them in the Angle Process Library for reuse.

When the head tilts, the system corrects the control point automatically (RTCP), so the cutting point follows the programmed path.

NC100

High-angle 5-axis cutting requires NC100.

5-axis cutting head →
Angle Process Library
Fig. 04 — Angle Process Library
Tilt angle set by edge
Fig. 05 — Tilt angle set by edge
04

Check Before Cutting

Run a software simulation to check the toolpath quickly while the machine stays still, or have the machine perform a dry run. Single-block execution lets you check for errors one block at a time.

If machining is interrupted, you can restart near the point of interruption. After a power failure or emergency stop, machining resumes from where the machine stopped.

Simulate
Fig. 06 — Simulate
Select process
Fig. 07 — Select process
05

Records and Maintenance

The system records the cutting length, elapsed time, and part count for each machining file. You can use these records to calculate machining costs.

Logs and port diagnostics help with remote troubleshooting. Back up the system with one click by creating an installer package.

Machining information and cost
Fig. 08 — Machining information and cost
I/O port diagnostics
Fig. 09 — I/O port diagnostics
06

Multilingual Interface

The interface supports more than 10 languages, including English, Chinese, Spanish, French, Portuguese, Russian, German, Italian, Korean, Vietnamese, and others.

  • English
  • 中文
  • Español
  • Français
  • Português
  • Русский
  • Deutsch
  • Italiano
  • 한국어
  • Tiếng Việt
  • and others

CUSTOMIZED FOR VICHOR MACHINES, WITH AFTER-SALES SUPPORT FROM VICHOR.